Leak-Free Flare Fittings

Flaretite copper seal connections are sold by Sigma Engineering, and ensure a permanent leak free seal on a variety of sizes of flares.  As flare connections are used extensively in the HVAC industry, it’s important that each and every connection is leak-free.  The seals can be used in mini-split units, existing flare connection components, schrader valves, pressure hoses, pilot lines, pressure control valves, and more.  Available sizes are 1/4″, 3/8″, 1/2″, 5/8″, and 7/8″.  Flaretite clips onto the male connection of the flare fitting where its compressed sealing rings compensate for any misalignment.  The seal does not need to be held in place by any glue or tape.  The Loctite coating then fills any gouges or scratches that may be present in the flare in order to prevent any possible leakage.  This creates a permanent, leak-free seal between the male and female flare fittings.  By eliminating the possibility for leaks, checkins or repair regarding the flare fittings are unnecessary.  In addition, efficiency is increased as any leaks that may have comprimised the circulation of fluid within the system are eliminated.  BTU Reps is considered the strongest supply and tool representative in the southeast and proudly enjoys representing Flaretite’s line of leak-free flare fittings.  We are your source for supply and tool quoting and proudly offer access to this product and inventory throughout the state of Florida.

Flaretite Order Chart

Part Number Size Quantity Torque Settings
SEFT-BP-04 1/4″ 6 8-10 ft lbs
SEFT-BX-04 1/4″ 100 8-10 ft lbs
SEFT-BP-06 3/8″ 6 15-25 ft lbs
SEFT-BX-06 3/8″ 100 15-25 ft lbs
SEFT-BP-08 1/2″ 6 25-35 ft lbs
SEFT-BX-08 1/2″ 100 25-35 ft lbs
SEFT-BP-10 5/8″ 6 40-55 ft lbs
SEFT-BX-10 5/8″ 100 40-55 ft lbs
SEFT-BP-12 3/4″ 6 50-60 ft lbs
SEFT-BX-12 3/4″ 100 50-60 ft lbs